Landrover Hanging Basket Bracket 1
The Land Rover hanging basket bracket highlights the classic lines of this well known vehicle. Our corner mounting option is available on this product in both the small and medium sizes.
Dimensions from the wall to the tip of the brackets are:-
Small – 200mm/8″, Medium – 300mm/12″, Large – 400mm/16″
Land Rover Hanging Basket Bracket
The Land Rover Series I, II, and III (commonly referred to as series Land Rovers, to distinguish them from later models) are off-road vehicles produced by the British manufacturer Rover Company that were inspired by the US-built Willys Jeep. In 1992, Land Rover claimed that 70% of all the vehicles they had built were still in use.
Series models feature leaf-sprung suspension with selectable two or four-wheel drive (4WD); though the Stage 1 V8 version of the Series III featured permanent 4WD. All three models could be started with a front hand crank and had the option of a rear power takeoff for accessories.
The source image for this bracket was one from my own collection showing my Series III Land Rover, this was then tailored for use as a bracket.
The Land Rover hanging basket bracket is a substantially built product that has been carefully and accurately cut with our computer controlled plasma cutting machine and hand finished. The bracket is mounted to an ornate, heavy wall plate that has three fixing holes, our corner mounting option is available on this product in both small and medium sizes. We have other vehicle hanging basket brackets.
|Small||200mm / 8″||5kg|
|Medium||300mm / 12″||15kg|
|Large||400mm / 16″||20kg|
The size is measured from the wall to the tip of the brackets:
For full finish options and dispatch times please see here.
Full installation instructions are listed here.